Smart Hardware & Security Monitoring_RL013B-RBA
- 20,000mAh Ultra-High Capacity
- Long-Lasting Continuous Power Supply
- 2.6A Fast Charging
- 2.47A Stable Power Output
| No. | Item | Parameter | Remarks | |
| 1 | Capacity | Typ. 20000 mAh | 0.2C Discharge | |
| Min. 18000mAh | ||||
| 2 | Energy | 64.8Wh | ||
| 3 | Nominal Voltage | 3.6V | ||
| 4 | Shipping Voltage | 3.5V~3.9V | ||
| 5 | Charge Voltage Limit | 4.2V | ||
| 6 | Maximum Charging Voltage | 4.2V | ||
| 7 | Discharge Termination Voltage | 3.0V | ||
| 8 | Discharge Cut-off Voltage | 2.5V | ||
| 9 | Charging Mode | CC-CV | CC/CV | |
| 10 | Charging Current | 1800 mA | ||
| 2600 mA | ||||
| 11 | Discharge Current | 494 mA | ||
| 2470 mA | ||||
| 12 | Standard Discharge Current | 1800 mA | ||
| 13 | Maximum Discharge Current | 5000 mA | ||
| 14 | Operating Temperature | Charging | 0°C~+45°C | |
| Discharging | -20°C~+60°C | |||
| 15 | Storage Temperature | Less than 1 Month | -20°C~+60°C | |
| Less than 3 Months | -20°C~+45°C | |||
| Less than 1 Year | -20°C~+25°C | |||
| 16 | Storage Requirement | Recharge the battery every 4 months during storage. | ||
| 17 | Relative Humidity | 65±20% | ||
| 18 | Battery Internal Resistance | ≤ 110mΩ | Measure the battery AC internal resistance at 1 kHz after standard charging. | |
| 19 | Battery Weight | 280±5g | About | |
| 20 | Battery Dimensions | Length | 86.5±0.5 mm | |
| Width | 72.0+0.5/-1 mm | |||
| Thickness | 21.5±0.5 mm | |||
20,000mAh Ultra-High Capacity: With a typical capacity of 20Ah, it meets the long standby and continuous operation requirements of security monitoring equipment.
Long-Lasting Continuous Power Supply: Featuring a high-capacity single-cell voltage platform, it provides stable power support for cameras, communication, sensing, and control systems.
2.6A Fast Charging: Supports a maximum charging current of 2.6A and adopts CC/CV charging management to improve charging efficiency.
Stable & Safe Power Output: Supports a maximum discharge current of approximately 2.47A, with charge limit, discharge termination, and cut-off voltage controls to enhance system reliability.